Decoding Engine Oil Standards: API, ILSAC, ACEA and Key OEM Approvals

Engine Oil Certification: API, ILSAC & ACEA Tests

OEM Specifications Breakdown

1. API Sequence & Bench Tests

Gasoline (API SP / FA‑4) & Diesel (API CK‑4 / FA‑4)

  • HTHS Viscosity (ASTM D4683): ≥2.6 mPa·s for SAE 0W‑20; measures film thickness under 150 °C shear.
  • Noack Volatility (ASTM D5800): Max ≤15 % mass loss; predicts oil consumption and deposit potential.
  • Oxidation (RP VOT, ASTM D2272): Minutes to ΔP under 150 °C/500 psi O₂; higher = better resist oxidation.
  • PDSC (ASTM D6749 / ISO 11357‑6): Induction time at 200–220 °C; screens antioxidant reserve.
  • Sequence I (LSPI, ASTM D7625): Low‑speed pre‑ignition tendency in TGDI engines; pass = no knock events.
  • Sequence IIIG (ASTM D8074): Timing‑chain wear; protects VVT systems under mixed lubrication.
  • Sequence IIIH (ASTM D6335): High‑temp deposits on pistons; evaluates cleanliness/residual carbon.
  • Sequence IVA (ASTM D7589): Turbocharger deposit control; measures inlet/valve cleanliness.
  • Sequence VG (GF‑6 only): Oxidation & volatility for extended drain life, used in ILSAC GF‑6A coolant durability.
  • Diesel‑Specific Engine Tests:
    • Sequence IIIF: TBN retention & sulfated ash (CEC L-40-A-99).
    • Sequence IIIE: Nitration & sludge control (Cummins M11 test).
    • Sequence VIE: Scuffing & wear control (Mack T-12 cam test).

2. ILSAC GF‑6A / GF‑6B Additions

  • GF‑6A: Aligns with API SP, adds low‑speed shear (broadened MIX test), enhanced oxidation & volatility limits.
  • GF‑6B: For SAE 0W‑16 only; tighter shear stability, allows “shield” mark for lowest‑viscosity oils.

3. ACEA 2025++ Standards (Gasoline & Diesel)

ACEA A/B/C (Passenger Cars)

  • A5/B5: Long‑drain; low SAPS? No—high shear protection for high‑mileage & performance.
  • C2/C5: Low‑SAPS <2.9 HTHS; for Euro 5/6 DPF compatibility, fuel‑economy focus.
  • C3/C4: Mid‑SAPS ≤3.5 HTHS; balances wear vs. DPF life.

ACEA E (Heavy‑Duty Diesel)

  • E4/E6: Legacy HD tests (Scania, Mack T‑12, Volvo VDS‑3) for soot & wear under high T.
  • E7/E9: Euro IV/V DPF & SCR compatibility; lower sulfated ash, high HTHS, stringent oxidation.

4. OEM Vehicle Specifications

OEM Spec Focus / Tests Key Notes
GM Dexos1 Gen 3 API SP + LSPI + timing‐chain + turbo tests Oil‐life monitoring standard; broad OEM approval.
GM Dexos2 HD diesel (API CK‑4) + extended TBN & deposit tests Heavy‑duty truck engines; high soot control.
MB 229.5 / 229.52 Fuel economy + wear; 229.52 adds DPF/PM filter compatibility MB‑approved gasoline & diesel; low SAPS for emissions.
VW 504/507 API 502 + Longlife‑04 engine tests + low SAPS Euro 5/6, includes PEA LSPI mitigation tests.
Porsche A40, C20/30/40 API SP + Porsche track tests; low‑friction for PDK A40 is ultra‑low viscosity for OEM long life.
BMW LL‑01 / LL‑04 High shear & deposit; LL‑04 adds mid‑SAPS DPF LL‑01 for high performance; LL‑04 Euro 4/5 diesels.
VW 502.00 / 505.00 Legacy gasoline: clearance‑specific; 505.00 for diesels Pre‑2005 VW engines; replaced by 504/507 in newer cars.
PSA B71 2290 ACEA C2+; low SAPS, fuel economy & DPF protection Citroën, Peugeot & Ford EcoBoost approvals.
Ford WSS‑M2C 950‑A / WSS‑M2C 960‑A1 API SP+; LSPI & turbo tests; 960 adds diesel cover Ford gasoline vs. diesel oil convergence.

Note: OEM standards layer additional sequence or engine tests (e.g., LSPI, PEA injectors, DPF/DPF regeneration controls). Always consult the latest OEM documentation for calibration tolerances and required drain intervals.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us