How to Choose Between an IMS Retrofit or IMS Solution
Selecting Between IMS Retrofit and IMS Solution Porsche IMS Bearings
Porsche’s intermediate shaft (IMS) bearing on M96/M97 engines is a known wear point that requires proactive replacement. Aftermarket solutions include the IMS Retrofit—using upgraded ball or roller bearings—and the IMS Solution—an oil‑fed plain bearing. Choosing between them depends on cost, intended lifespan, and maintenance tolerance.
1. Solution Overview
1.1 IMS Retrofit
- Design: Bolt‑in replacement of the factory sealed IMS bearing with dual‑row ceramic hybrid ball bearings (Single Row Pro & Classic Dual Row) or a cylindrical roller bearing (RND RS Roller). Installation uses existing IMS tools and procedures with no engine modifications.
- Lubrication: Relies on engine oil splash in the wet‑sump system—no external oil feed required.
- Service Interval: Classic Dual Row & Single Row Pro: 6 years/75,000 mi; RND RS Roller: 6 years/75,000 mi.
- Warranty: Typically 2 years/24,000 mi for RND Roller kits; similar coverage applies to ceramic retrofit kits.
1.2 IMS Solution
- Design: An oil‑pressure‑fed plain bearing inspired by the Mezger engine layout, eliminating all moving wear parts.
- Lubrication: Dedicated oil feed via a spin‑on filter adapter and external reservoir ensures constant pressurized lubrication.
- Service Life: Lifetime solution without planned intervals—once installed, no further IMS bearing replacements are needed.
- Installation: Requires oil‑line plumbing, specialized adapters, and removal of engine covers—best performed during a full engine rebuild.
2. Comparing Cost & Complexity
The IMS Retrofit offers a lower entry cost—about 50% less than the IMS Solution—and a simpler, bolt‑in installation that uses stock tools. However, the IMS Solution’s permanent design can save future replacement costs and labour.
3. Retrofit Bearing Choices: Ceramic Hybrid vs. Cylindrical Roller
3.1 Ceramic Hybrid Ball Bearing
- Construction: Steel races with sintered silicon nitride balls—the same bearing Porsche uses in its OEM retrofit kit.
- Load Capacity: Dual row ceramic bearings support ~4,000 lb dynamic load and ~2,000 lb axial thrust (50% thrust capacity).
- Performance: Low friction, excels under poor lubrication, zero reported failures in LN Engineering’s dual row kits.
- Cost: Mid‑range pricing, more economical than roller kits of similar rating.
3.2 Cylindrical Roller Bearing (RND RS Roller)
- Construction: Custom heat‑treated 52100 steel cylindrical rollers with integrated thrust surfaces supporting both radial and axial loads. The special bearing used in this kit provides true internal thrust control in both directions - something no other commercially available cylindrical roller bearing kit offers.
- Load Capacity: ~5,800 lb dynamic and ~580 lb axial thrust (~10% thrust capacity)
- Performance: Suited for high‑power engines; slight friction increase versus ceramics but no skidding issues thanks to thrust ring design.
- Service Interval & Warranty: Recommended 6 years/75,000 mi; 2 year/24,000 mi limited warranty.
- Cost‑Effectiveness: Economical alternative that requires no extra tools or oil‑line modifications needed by the IMS Solution or some ceramic retrofit kits.
4. Choosing the Right Upgrade
- Budget: If cost and installation simplicity matter, the RND RS Roller retrofit delivers strong load capacity without extra tooling required of the Single Row Pro or IMS Solution.
- Longevity: Retrofit offer multi‑year reliability; the IMS Solution provides a “fit‑and‑forget” lifelong fix.
- Use Case: If you think you might only keep your Porsche for a few years, the IMS Retrofit might be more cost effective; if this is your "forever" Porsche, going with the IMS Solution is a no-brainer.
- Installation: Retrofit kits allow retention of the stock oil filter arrangement; IMS Solution requires the addition of an external oil feed line to supply oil to the IMS Solution's plain bearing.
5. Conclusion
No single answer fits every Porsche owner. For a balance of performance, cost, and ease, the IMS Retrofit—either ceramic hybrid or RND cylindrical roller—provides proven reliability and straightforward installation. If ultimate durability with zero moving wear parts is your goal and budget allows, the IMS Solution offers a permanent, maintenance‑free upgrade inspired by Porsche’s racing engines.